Internal Connectors - Asus UP-895MD Series User Manual

1.2.9

Internal connectors

1. Intel Z97 Serial ATA 6 Gb/s connectors (7-pin SATA6G_12, SATA6G_34,
®
SATA6G_56/ SATAEXPRESS)
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s
signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
chipset.
• These connectors are set to [AHCI Mode] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID
Mode]. Refer to section 3.6.4 SATA Configuration for details.
• Before creating a RAID set, refer to section 5.1 RAID configurations or the manual
bundled in the motherboard support DVD.
• The M.2 Socket 3 and SATAEXPRESS connectors share the same PCIe x2
bandwidth. When you use both connectors, the BIOS automatically detects the
devices connected to these connectors and set a higher priority to SATAEXPRESS
than M.2 Socket 3 interface. Refer to section 3.6.4 PCH Storage Configuration of
this user guide for more details.
• The SATAEXPRESS connector can support one SATA Express device or two SATA
devices.
ASUS Z97-PRO Series
Rapid Storage Technology through the onboard Intel
®
Z97
®
1-33