Status Display; Activate/De-Activate The Immobiliser - Invacare TDX SP Operating Manual

7.6

Status display

The status display serves to display error messages. For error codes see chapter "Error Codes
and Diagnostic Codes" on page 46.
7.7

Activate/de-activate the immobiliser

Activate the immobiliser
• Whilst the remote is switched on, press and hold the ON/OFF button
(1) for 4 seconds. The remote will switch off immediately. After 4
seconds the battery charging display will illuminate briefly and the
horn will be heard twice. The immobiliser is activated.
De-activate the immobiliser
• Whilst the immobiliser is activated, switch on the remote using the
ON/OFF button (1). The diodes of the battery charging display will
illuminate briefly once from left to right. A slow countdown will then
be displayed from right to left.
• Press the horn button (2) twice before the countdown is completed.
You have about 10 seconds to do this. The immobiliser is de-
activated.
Activate
Deactivate
39