Kodak EasyShare M820 User Manual
Digital frame
Hide thumbs
Also See for EasyShare M820:
- Extended user manual (51 pages) ,
- User manual (29 pages) ,
- User manual (51 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Need help?
Do you have a question about the EasyShare M820 and is the answer not in the manual?
Questions and answers
unit doesn't recognize sd card
The Kodak EasyShare M820 may not recognize the SD card due to the following reasons:
1. Write Protection Enabled – If the SD card is write-protected, the frame may not be able to access it. Unlock the card by sliding the switch on the side.
2. Card is Full – If the storage is full, delete some pictures or use a different card.
3. Card Compatibility – Ensure the SD card is of a supported type (SD, SDHC, MMC, MS, or XD-Picture).
4. Card or File Error – If there is an error reading or writing files, try using another SD card or reformat the current one.
5. Device Issue – Restart the frame by turning it off and on again. If the problem persists, contact Kodak support.
This answer is automatically generated
I have the frame plugged into an outlet, but it does not come on.