Specifications - Toshiba MCY-MAP0401HT Owner's Manual

CAUTION
If any of the following conditions occur, turn off the main power supply switch and immediately contact the dealer:
• Switch operation does not work properly.
• The main power fuse often blows out, or the circuit breaker is often activated.
• A foreign matter or water fall inside the air conditioner.
• When the air conditioner does not operate even after the cause of the protective device activation has been removed.
(The operation lamp and on the remote controller are flashing.When
or and a number are displayed on the remote controller, also inform a qualified service person of the display
content.)
• Any other unusual conditions are observed.
Confirmation and check
When a trouble occurred in the air conditioner, the check code and
the indoor unit No. appear on the display part of the remote
controller.
The check code is only displayed during the operation.
If the display disappears, operate the air conditioner according to the
following "Confirmation of error history" for confirmation.
Confirmation of error history
When a trouble occurred on the air conditioner, the
trouble history can be confirmed with the following
procedure. (The trouble history is stored in memory up
to 4 troubles.)
The history can be confirmed from both operating
status and stop status.
Procedure
When pushing and buttons at the same time for 4
seconds or more, the following display appears.
If [ Service check] is displayed, the mode enters in the trouble
1
history mode.
• [01 : Order of trouble history] is displayed in CODE No. window.
• [Check code] is displayed.
• [Indoor unit address in which an error occurred] is displayed in
UNIT No.
Every pushing of [ /
displayed in order.
2
The numbers in CODE No. indicate CODE No. [01] (latest) to [04] (oldest).
CAUTION
Do not push button because all the trouble history of the indoor unit will be deleted.
3
After confirmation, push button to return to the usual display.
1. Check the troubles according to the above procedure.
2. Ask an authorized dealer or qualified service (maintenance) professional to repair or maintain the air conditioner.
3. More details of the check code are explained in Service Manual.
37-EN
and a combination of
Indoor unit No. in which
Check code
an error occurred
TEMP. ON / OFF
2
TIMER SET FAN MODE
TIME SAVE A A VENT
FILTER L L
RESET TEST SET CL SWING/FIX UNIT LOUVER
3
Description
] button used to set temperature, the trouble history stored in memory is
– 19 –
12

Specifications

Model
MCY-MAP0401HT
MCY-MAP0501HT
, , , ,
MCY-MAP0601HT
MCY-MAP0401HTZ
MCY-MAP0501HTZ
MCY-MAP0601HTZ
MCY-MAP0401HTZG
MCY-MAP0501HTZG
MCY-MAP0601HTZG
* Under 70 dB
1
Sound power level (dBA)
Weight (kg)
Cooling Heating
✽ ✽ 117
✽ ✽ 117
✽ ✽ 117
✽ ✽
117
✽ ✽ 117
✽ ✽ 117
✽ ✽ 117
✽ ✽
117
✽ ✽ 117
38-EN