Programing Transmitter(S) To Opener; Programming Transmitter To Opener - Wayne-Dalton classicdrive 3018 Installation Instructions And Owner's Manual

programming transmitter(s) to opener
Tools Needed:
warnIng
Right Side Of Opener
None
DuRING PROGRAMMING THE GARAGE DOOR
MAy OPERATE. KEEP PEOPLE AND OBjECTS
CLEAR OF THE MOVING DOOR TO PREVENT
DOOR DAMAGE OR POSSIBLE PERSONAL
INjuRy.
Program Status
LED
note: The opener can be activated by up to 8 remote
transmitters and 2 keyless entries. If a 9th remote is
programmed the first remote programmed will be lost
from memory. The same is true if a third keyless entry
is programmed, the first will no longer be in memory
Program
Button
and will not operate the opener.
note: Do not press any button on the transmitter
until instructed.
transMItter:
1. Press and release the PROGRAM button located
on the garage door opener. The red PROGRAM
STATuS light on the opener unit and the overhead
lamp will turn on and remain lit for one minute,
indicating activation of the learn mode.
Large Button
2. Press one of the buttons on the transmitter you
wish to use to operate the door. The PROGRAM
STATuS light on the opener and the overhead light
will turn on and off three times indicating a suc-
LED
cessful learn.
3. Press the same button on the transmitter once
more to confirm operation. The opener will turn on
and move the door.
transmitter
32
please do not return this product to the store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need
You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com