A - 4
CA10 User Guide
Engage the hooks of the Cradle Base with the holes on the bottom of Cradle. Lower the Cradle onto the Cradle
4.
Base until it engages the snaps (see
Snap
Hook
Cradle Base Snaps
Figure A-5
Plug the DC Power Connector into the cradle (see
5.
DC Power
Connector
DC Power Connector
Figure A-6
Connect the AC Line Cord to a 110-220 Vac, 50-60Hz AC line power source; the Power LED on the cradle
6.
lights green.
Figure
A-5).
Snap
Hook
Figure
Cradle
A-6).