Motorola CA10 User Manual page 35

3 - 8 CA10 User Guide
Go to the Network Settings tab (see
6.
your access point) and security. Enter the name for your network and click Save.
Network Settings Tab
Figure 3-10
Go back to the Configure Devices tab, enter a new name in the Configuration field and click Add new.
7.
If applicable, select the new firmware in the Firmware field.
8.
Select the name for your network from the drop-down.
9.
Click on Save.
10.
Click on Apply Settings or click on a single CA10 you want to configure and select Apply Configuration /
11.
Reset. The Status LED of all CA10s should blink amber, indicating download in progress. Firmware download
may take two to three minutes. If only network settings are changed, download may take 20 seconds.
Figure 3-10) and enter the SSID (should be identical to the ESSID of