3 - 4
CA10 User Guide
Enter 192.168.0.201 in the IP Address field (see
9.
Enter 255.255.0.0 in the Subnet mask field.
10.
Click OK twice and close the Local Area Connection window.
11.
Setting Your Wireless Access Point
To set the access point:
Follow the instructions in your access point user guide to access the configuration menu of your access point.
1.
Proceed to the Configure Your Wireless Settings section to set up the security settings:
2.
•
ESSID: motorola
•
Encryption Status: No security
•
Subnet Mask: Class B (255.255.0.0)
Installing the Deployment and Configuration software
To install the Deployment and Configuration software:
Start the Deployment Application installation file. As the installation starts, the following welcome window
1.
displays. Click Next to continue.
Welcome Window
Figure 3-4
Figure
3-3).