Stopping The Engine; Release Lever - Husqvarna Rider 15V2 Operator's Manual

WARNING!
Never drive the machine on
ground with a slope of more than
15°. Mow slopes upwards and
downwards, never across. Avoid
sudden changes in direction.

Stopping the engine

Preferably allow the engine to idle for a minute to
obtain normal working temperature before stopping
it if it has been working hard. Avoid idling the
engine for long periods, as there is a risk of carbon
build-up on the spark plugs.
1. Lift up the cutting unit by pulling the lever back
to the locked position.
2. Move the throttle control to the MIN. position.
Turn the ignition key to the STOP.
3. When the Rider is at a standstill, press down the
parking brake and push in the locking button.

Release lever

The release control must be pulled out in order for
the Rider to be moved when the engine is shutoff.
DRIVING
MAX 15
6007-002
6017-240
6017-246
6007-217H
21
English –