Osd Operations - Hyundai H-LCD1509 Instruction Manual

OSD operations

In this manual, the OSD Menu maybe changed and different from your real TV screen shown without further
notice. Because this manual is just a sample to help you how to operate TV menu setting.
When you are satisfied with your adjustment, press ENTER button to confirm or press EXIT button to exit
the menu setting.
PICTURE SETTING
Press MENU button on the RC, there will be a menu displayed on the
screen:
Use RIGHT cursor button firstly, the cursor will be on the line of
"Picture Mode: Vivid". And then, press RIGHT/LEFT cursor
buttons repeatedly to select the picture mode from Vivid, User,
Normal or Soft.
After select the Picture Mode, you can use UP/DOWN cursor
buttons to select the item of Brightness, Contrast, Saturation,
Sharpness and Hue. And then use RIGHT/LEFT cursor buttons to
adjust the value of each item.
Note: Only the item of Brightness and Contrast could be operated under the PC signal source.
SOUND SETTING
Press the MENU button on the remote control, and then press
UP/DOWN cursor buttons to select the Sound setting, the menu will
be shown as below:
Use RIGHT cursor button firstly, the cursor will be on the line of
"Sound Mode: Normal". And then, press RIGHT/LEFT cursor
buttons repeatedly to select the sound mode from Normal, News,
Movie or User.
After select the Sound Mode, you can use UP/DOWN cursor
buttons to select the item of Volume, Bass, Treble and Balance.
And then use RIGHT/LEFT cursor buttons to adjust the value of
each item.
CHANNEL SETTING (for analogue TV signal source only)
Press MENU button on the remote control, and then press UP/DOWN
cursor buttons to select the Channel setting, the menu will be shown
as below:
Auto Tune
Use RIGHT cursor button firstly, the cursor will be on the line of
"Auto Tune". And then, press RIGHT cursor button again, a menu
will be displayed as followed:
As shown on the menu, the TV will automatically search stations. When searching, press the MENU button
to cancel searching. After the searching, the TV will begin to play the station 1.
Manual Tune
Select the 'Manual Tune' first, and then press RIGHT cursor button:
As shown on the menu, the channel number will display on the screen.
11
M/N