Motion Detection Settings - Swann DVR8-NET-8000 User Manual

ALARM ENABLE: alarm trigger switch, can be set to off, N.C(normal closed) or N.O(normal
open). If users set it to off, the DVR will ignore the alarm input.
MOTION ENABLE: Motion alarm switch, can be set to ON or OFF. If set to off, the DVR will
ignore the motion alarm.
MOTION LEVEL: motion sensitivity level, if the figure in the picture is small, please set to high
or very high, default is normal.
BUZZER TIME: buzzer sound time when there is a sensor or motion alarm.
SENSE RECTIME: when a motion or sensor alarm is triggered, the recording time of DVR,
default is 10 seconds.
Note: Users should press Schedule button after setting up the parameters so to activate
the settings.

21. Motion Detection settings

1) When surveying nearby objects (2-10 meters)
When in daytime, please set motion detection sensitivity to Normal level; when in night,
please set to low.
2) When surveying objects in 50-100 meters area
The objects 50-100 meters away will be quite small on the screen. When in daytime, please
set motion detection sensitivity to high level.
8-Channel Digital Video Recorder
13