Network Setup; N/W Enable Set - Swann DVR8-NET-8000 User Manual

8-Channel Digital Video Recorder
17. Network Set
When the cursor moves to Network Set, press the Enter button, and the network setup window
will appear. Please note if the Netviewer software is connected to the DVR. You cannot access this
menu unless you close the Netviewer software.
IP MODE: the DVR has 2 IP modes, STATIC IP and DHCP, if you select STATIC IP, you can set
the IP address manually, if you select DHCP mode, the DVR will automatically get the IP address.
For STATIC IP, press UP or DOWN button to move the cursor among the digits, you can press
LEFT and RIGHT buttons to modify the digits, press enter to save you change.
WEB SERVER PORT: the WEB transmit port for data. Default is 0080.
NETWORK ENV: the DVR has three types of different network conditions: LOCAL,
EXTER_LAN, and EXTER_WAN. If in local network, please select LOCAL. If for internet use,
please choose EXTER_LAN. If the internet condition is not very good, please select
EXTER_WAN.
VIDEO PORT: the video transmit port for the computer. Default is 5000.
COMMAND PORT: the command transmit port for the computer. Default is 5001.
If you change any of the VIDEO PORT and COMMAND PORT or MAC address, you have to
restart the DVR before you use the "net viewer" software.
Note: if you have change the MAC address, you can not see the "MAC ADDR SET".

18. N/W Enable Set

When the cursor moves to N/W Enable, press the Enter button, and the N/W Enable setup window
will appear.
11