Autoseq Setup; Record Setup - Swann DVR8-NET-8000 User Manual

Press LEFT or RIGHT button to select CON/BRI/HUE/SAT, press UP or DOWN button to
change the value, if setup over, press UP or DOWN button to change channel.
12. Autoseq Set
When the cursor moves to Autoseq Set, please press enter button, the Auto Sequence Setup
window will appear.
Press the UP or DOWN button to select channel, press LEFT or RIGHT button to change the
auto Sequence time.
13. Record Set
When the cursor moves to Record Set, then press the Enter button, the Record Setup window will
appear, which is illustrated as below. Press UP or DOWN button to move the cursor. Then press
the LEFT or RIGHT button to change the value. While the DVR is in recording or playback mode,
8-Channel Digital Video Recorder
8