Step 5: Remove The Shock Sleeves And Shipping Brace - Speed Queen 802757R4 Installation Instructions Manual

Step 5: Remove the Shock Sleeves and
Shipping Brace
1. Remove panel.
Figure 9
2. Remove brace. Five bolts secure brace to
machine. For easier removal, remove in order
shown.
Figure 10
3. Remove shock sleeves.
Figure 11
802757
FLW2269N
FLW2269N
5
1
2
4
3
FLW2270N
FLW2271N
FLW2271N
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
4. Replace panel.
Figure 12
Figure 13
IMPORTANT: The shipping brace, bolts,
lockwashers and shock sleeves should be saved and
MUST be reinstalled whenever the unit is moved
more than four feet. Do not lift or transport unit
from front or without shipping materials installed.
Refer to the User's Guide for proper instructions
on reinstalling the shipping materials.
IMPORTANT: DO NOT tip washer more than
6 inches (152.4 mm) in any direction after shipping
brace has been removed. Shock absorbers may
separate and damage to washer may result. For
leveling purposes, the washer may be tilted a
maximum of 6 inches (152.4 mm) in any direction.
FLW2272N
FLW2272N
FLW2268N
FLW2268N
7