Kia Sorento Owner's Manual page 73

Installing a child restraint system
with a lap/shoulder belt
To install a child restraint system on
the outboard seats, do the following:
1. Place the child restraint system in
the seat and route the lap/shoul-
der belt around or through the
restraint, following the restraint
manufacturer's instructions. Be
sure the seat belt webbing is not
twisted.
2. Fasten the lap/shoulder belt latch
into the buckle. Listen for the dis-
E2MS103005
tinct "click" sound.
Position the release button so that it
is easy to access in case of an emer-
gency.
Safety features of your vehicle
OEN036101
3. Buckle the seat belt and allow the
seat belt to take up any slack. After
installation of the child restraint
system, try to move it in all direc-
tions to be sure the child restraint
system is securely installed.
If you need to tighten the belt, pull
the webbing toward the retractor.
When you unbuckle the seat belt and
allow it to retract, the retractor will
automatically revert back to its nor-
mal seated passenger emergency
locking usage condition.
OEN036104
3 43