Kia Sorento Owner's Manual page 657

Maintenance
4. With the head lamp and battery in
normal condition, aim the head
lamps so the brightest portion falls
on the horizontal and vertical
lines.
5. To aim the high beam up and
down, turn the driver (1) clockwise
or counterclockwise. To aim the
low beam up and down, turn the
driver (2) clockwise or counter-
clockwise. To aim the low beam
left and right, turn the driver (3)
clockwise or counterclockwise.
7 102
With AFLS
1. Turn off the engine
2. Turn the light switch to the low
beam position.
3. Position the tyres straight ahead
with the steering wheel.
4. Turn on the engine.
5. Inflate the tyres to the specified
pressure and remove any loads
from the vehicle except the driver,
spare tyre, and tools.
6. The vehicle should be placed on a
flat floor.
7. Draw vertical lines (Vertical lines
passing through respective head
lamp centres) and a horizontal line
(Horizontal line passing through
centre of head lamps) on the
screen.
8. With the head lamp and battery in
normal condition, aim the head
lamps so the brightest portion falls
on the horizontal and vertical
lines.
9. To aim the high beam up and
down, turn the driver (1) clockwise
or counterclockwise. To aim the
low beam up and down, turn the
driver (2) clockwise or counter-
clockwise. To aim the low beam
left and right, turn the driver (3)
clockwise or counterclockwise.