Kia Sorento Owner's Manual page 655

Maintenance
4. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
7 100
Front fog lamp bulbs/cornering
lamp (if equipped)
C C o o r r n n e e r r i i n n g g
C C o o r r n n e e r r i i n n g g
l l a a m m p p
l l a a m m p p
F F o o g g l l a a m m p p
F F o o g g l l a a m m p p
1. Remove the front bumper under
cover.
2. Reach your hand into the back of
the front bumper.
3. Disconnect the power connector
from the socket.
4. Remove the bulb-socket from the
housing by turning the socket
counter clockwise until the tabs on
the socket align with the slots on
the housing.
5. Install the new bulb-socket into the
housing by aligning the tabs on
the socket with the slots in the
housing. Push the socket into the
housing and turn the socket clock-
wise.
6. Connect the power connector to
the socket.
7. Reinstall the front bumper under
cover.
✽ ✽ NOTICE
If the headlamp aiming adjustment
OXM073053L
is necessary after the headlamp
assembly is reinstalled, consult an
authorised Kia dealer.