Sub Function - Plasma Purification; Sub Function - Humidifier - LG PQRCVSL0 Owners & Installation Manual

Owner's instruction

Sub function - Plasma Purification

Only products with humidifying function can use this.
• Cleaning air function is additional function and it might not be indicated or operated at the partial
product.
• Cleaning air function is possible only when product is running.
• If you want independent cleaning air drive, please setup cleaning air by pressing additional drive
button at ventilation drive.
32 New Wide Wired Remote Controller
The method to setup cleaning air
1 Repeat pressing button
until icon flash.
2 Operate or cancel Plasma
Purification function by pressing
button.
( icon appears/disappears on
display part up
to selection )
3 After setting, press button
to exit.
❈ After setup, it automatically gets out of setup
mode if there is no button input for 25 seconds.
❈ When exiting without pressing set button, the
manipulated value is not reflected.

Sub function - Humidifier

Only products with humidifying function can use this.
•
Humidification function might not be operated at the partial product.
Owner's instruction
1 Repeatedly pressing button
until icon flash.
2 Turn on/off HUMIDIFIER by
pressing button (The icon
will be displayed in case of
SETTING option and disappear
in reverse case .)
3
Press button to exit.
❈ After setup, it automatically
gets out of setup mode if there
is no button input for 25
seconds.
❈ When exiting without pressing set
button, the manipulated value is not
Ownerʼs & Installation Manual 33