Installer Setting - Celsius/Fahrenheit; Installer Setting - Option Function Setting - LG PQRCVSL0 Owners & Installation Manual

Installation instruction
Installer Setting-Celsius / Fahrenheit Switching
This function is used for switching the display between Celsius and Fahrenheit.
(Optimized only for U.S.A)
❈
Whenever press button in Fahrenheit mode, the temperature will increase/drop 2
degrees.
22 New Wide Wired Remote Controller
1 If pressing button long for 3
seconds, it enters into remote
controller setter setup mode.
- If pressing once shortly, it
enters into user setup mode.
Please press more than 3 seconds for
sure.
2 Repeat pressing button to select
Function code 12.
Function Code conversion mode value
Ex) Fahrengeit Setting
3 Select Temperature unit mode by
pressing button.
(00: Celsius, 01: Fahrenheit)
4 Press button to save or release.
5 Press button to exit or
system will automatically exit
after 25 seconds without any
input.

Installer Setting - Option Function Setting

Setting feature for indoor unit when air cleaning / heater / humidifier / Up/down grill / Ventilation KIT is
newly installed, or installed unit is removed.
Installation instruction
1 If pressing button long for 3
seconds, it enters into remote
controller setter setup mode.
- If pressing once shortly, it enters
into user setup mode. Please press
more than 3 seconds for sure.
2 If pressing button repeatedly, it moves to
the selected option function code as picture
below.
Function
Plasma purification
Electric heater
Dehumidifier
Elevation grill
Ventilation kit
3 Select existing condition
of each mode by pressing
button.
(00: not installed,
01 : installed)
Function Code Existing condition
4 Press button to save.
5
Pressing button will exit settings mode.
❈ After setup, it automatically gets out of
setup mode if there is no button input for
25 seconds.
❈ When exiting without pressing set button,
the manipulated value is not reflected.
Ownerʼs & Installation Manual 23
Code
20
21
22
23
24