Table of Contents
Advertisement
Setting the heating duration
A
B
E71348
CAUTION
The recommended setting is 30
minutes. Longer durations will reduce
battery life or even flatten the battery.
Note: The heating duration for pre-set
times and the timed heating mode can
be set between 10 and 120 minutes.
Press and hold button A for more than
three seconds, until the time flashes in the
display. Wait for five seconds until the
heating symbol appears and the heating
time flashes.
Press buttons B and D to adjust the
heating duration.
After setting the heating duration, press
button A. The display will show the clock
time with the colon flashing.
Switching off the heater
Press the heating symbol button. The
heater will operate for an additional three
minutes, and then stop. The display will
then show the clock time.
Climate control
D
Timed heating mode
E71349
The heater may be switched on to heat
for the pre-set duration at any time. Press
button C. The display will light up and
show the remaining heating time and the
heating symbol.
Continuous heater operation
B
E71350
WARNING
The heater will continue to operate
after the ignition is switched off.
Switch the heater off to avoid
unnecessary heating.
56
C
C
Advertisement
Table of Contents
