Table of Contents
Advertisement
WARNINGS
Switch off the ignition and apply the
parking brake.
If your vehicle has a manual
transmission, select first or reverse
gear. If it has an automatic
transmission, select park.
Have the passengers leave the
vehicle.
Secure the diagonally opposite
wheel with an appropriate block or
wheel chock.
Make sure that the arrows on
directional tyres point in the direction
of rotation when the vehicle is
moving forwards. If you have to fit a spare
wheel with the arrows pointing in the
opposite direction, have the tyre refitted
in the correct direction by a properly
trained technician.
Do not work underneath the vehicle
when it is supported only by a jack.
CAUTION
Do not lay alloy wheels face down on
the ground, this will damage the
paint.
Note: Make sure that the jack is vertical
to the jacking point and the base is flat on
the ground.
E76137
Wheels and tyres
1. Attach the chisel clip to the end of the
2. Insert the flat end of the wheel brace
E76138
3. Install the locking wheel nut key.
4. Slacken the wheel nuts.
5. Jack up the vehicle until the tyre is
6. Remove the wheel nuts and the
Installing a road wheel
the National Type Approval invalid. See
Technical specifications (page 111).
108
wheelbrace.
between the rim and the hub cover
and carefully remove the hub cap or
cover.
clear of the ground.
wheel.
WARNING
Use only approved wheel and tyre
sizes. Using other sizes could
damage the vehicle and will make
Advertisement
Table of Contents
