Troubleshooting tips
◆ If the remote control is not working, please remove the failure according the
following explain.
◆ When the controller can't work normally (pressing the emitter buttons, the
receiver has not action), please check the failure by the following steps:
Item
Failure description
Emitter LED light doesn't
1
shine, Receiver has no
action.
Emitter LED light is normal,
2
but Receiver has not
action.
Method
◆ Confirm if the battery power is normal.
a. Check the battery directions
b. Check the battery box directions
c. Check the battery capacity
d. Check if the tube is break or uncertain close
◆ send to repair
◆ Confirm the receiver power input is normal.
◆ Check if AC power fuses and DC power fuse
melt, if it is necessary, turn off the power and use
the spare fuse.
◆ Confirm if the relay output fuse melt, if it is
necessary, please use the spare fuse.
◆ Send to repair.
21
22