Installation instruction
★ Installation notice
Check and confirm the control traveling crane is normal
●
before installation.
Turn off the power.
●
For the receiver position, wherever the crane goes,
●
it should not impact any building extruded.
The receiver should be fixed tightly,
●
otherwise it maybe loose and dropped.
It should learn about the crane power and emitter's function
●
settings (include relay output) to avoid incorrect connection.
The receiver position should be away from motor, transducer
●
and cable at least 3 meters, (see following picture) to avoid
unnecessary interference.
Motor
Receiver
>3M
>3M
M
Cable
15
>3M
Transducer
16