Using Notice - Ele 600 series User Manual

Using Notice

Install the alkalic battery rightly, suggest to use above 1600AH
●
battery to make the use time reach 100hours. Don't use NIH
battery, its voltage is only 1.2V.
Make sure the Red EMS button is loose and then turn the emitter
●
power button to ON.
Please pay attention to observe the indicator, it will help you to
●
use the remote system.
◆ The explication between the indicator of the transmitter and the
corresponding status
LED status
Red light blink then
close
Red light light 3s then
warning
Complement
And then operate
normal（blue light is
bright）
And then red blink one
time after pressing any
buttons
And then no action
after pressing any
buttons
And then normal
operation（blue light is
bright） between the transmitter
Explication
The transmitter is
normal, the voltage &
buttons are normal,
communication good
The transmitter is
low voltage, please
machine after change
change
the battery on time.
There is any button
in touch status, the
transmitter
pretect itself.
Weak signal，please
ensure that there is no
Weak signal， please
shielding or interferent
and the receiver.
19
20
Processing method
Operation normal
Please open the
the battery.
Please check the
buttons blocked or
depressed and then
open the machine.
attention to use.