Table of Contents
Advertisement
Every time you press EMS button,the emitter will send stop signal
●
to the receiver continously, the signal keeps 3 seconds then stop
sending, you must press EMS button to continue. If you turn the
power to "OFF", then the EMS is invalid.
Before close the power of the emitter, please press the red EMS
●
button, then turn the power button to "OFF". Don't close the
power directly, it won't disconnect the relay and keeping on.
Button interlock: the emitter has the function, when you press
●
"UP" button, then the emitter won't respond "DOWN"
command.
Change the battery: please change the battery on time when the
●
voltage is low, you can open the battery cover, take out them and
put new battery.
◆ The explication between the indicator of the transmitter and the
corresponding status
LED status
AC indicatoris bright
Sin indicatoris bright
M blue lightis bright
M red lightis bright
A indicator is bright
U,D,E,W,N,S is bright
Complement
Voltage normal
Normal signal
The receiver is open,
MAIN relay close
The receiver is in 2
speed status.
The receiver AUX relay
Corresponding
direction relay acts
Explication
receiving
600A,610A,620Ahave
close
Remark
Advertisement
Table of Contents
