Advertisement

Quick Links

LCD Display / Custom Settings
Measuring
Radio Trigger Mode
Modes
Incident / Reflected
Spot Function Icons
Memory/Multi
ISO Display
Flash Indicator
Battery
Indicator
Shutter
Priority
Indicator,
Shutter
Speed &
f.p.s Display
Analog Scale
Digital Aperture Value, Aperture Priority, EV
Brightness Difference, Average Function, EV Display
Custom Setting List
No.
Lighting
Custom Setting Name
Ambient
1
& Flash
Ambient
2
Exposure Compensation Display Setting
& Flash
Ambient
3
Increments of Shutter Speed
& Flash
Ambient
4
Increments of Aperture
& Flash
5 Ambient
6 Ambient
7
Flash
Corded Flash Mode
8
Flash
Auto-Reset Cordless Flash Mode
9
Flash
Analyzing Measurement
*10 Ambient
Luminance Display
11 Ambient
Luminance Measurement in Incident Mode
* Individual indicates that LUX and Footcandles (FC) will be displayed w/out f/s (or shutter speed) and Analog Scale.
Compound indicates that LUX and Footcandles will be displayed with f/s (or shutter speed) and Analog Scale.
To set Custom Settings (DIP Switch 4): Located in Battery Compartment.
1. Turn power off.
2. Open battery compartment door and set DIP Switch 4 (CS) to ON
(up position).
3. Turn power on. "CS" (Custom Settings) will appear in upper right
Analyzed %
hand corner.
of Flash
4. Use JOG WHEEL to select Custom Setting number (No.)-see chart below.
Indicator
5. Press Mode Key to Select Item Number (Item #)-see chart below.
Luminance
6. Set DIP switch 4 (CS) to OFF (this will turn power off automatically).
Indicator
7. Replace battery compartment door and press power button on.
Exposure
NOTE: Pressing M.CLEAR in CS mode will reset all settings to default (No. 0)
Compensation
0
Film Sensitivity
ISO 2 Setting
1/3 Step
Always Display
1 Step
1 Step
T Priority Mode
Available
F Priority Mode
Available
Available
Available
Available
Not Available
Not Available
Item
1
2
3
Filter Setting 0.1
-
-
EV Step (–5.0EV)
Not Displayed
-
-
1/3 Step
1/2 Step
-
1/3 Step
1/2 Step
-
Not Available
-
-
Not Available
-
-
Not Available
-
-
Not Available
-
-
Not Available
-
-
Compund +
Compound Individual
Individual
LUX
FC
LUX, FC
Sekonic L-608
Sekonic L-608

Quick Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L-608 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sekonic L-608

  • Page 1: Quick Guide

    Sekonic L-608 LCD Display / Custom Settings Measuring To set Custom Settings (DIP Switch 4): Located in Battery Compartment. Radio Trigger Mode Modes Incident / Reflected 1. Turn power off. Spot Function Icons 2. Open battery compartment door and set DIP Switch 4 (CS) to ON...
  • Page 2 Quick Guide to the Sekonic L-608 Basic Operation - Sekonic L-608 Advanced Functions - Sekonic L-608 On/Off Motion Picture (CINE) Press down power key to turn on meter. Battery icon will Turn JOG WHEEL (in T Priority Mode) past shutter speed appear Monitors Battery level.

Table of Contents