Service Port Setup; Figure 4-217 Service Port Setup Menu Layout - AddPac AP-VP500 Installation And Operation Manual

AP-VP500 Video Phone Installation & Operation Guide, Release 1.00

Service Port Setup

This menu enables or disables FTP, TELNET, SNMP services and changes the TCP/UDP Port
number of the relevant service.
Figure 4-217 Service Port Setup Menu Details
These settings shows a remote device which can access and control AP-VP500 through FTP
which is set to the port number of 21, HTTP which is set to the port number of 80 and TFTP
which is set the port number of 69 at default.
The AP-VP500 can perform the role of SNMP Agent. By using SNMP of the remote device, you
can access the AP-VP500 and use its SNMP (default: 161).
GUI EZ-Setup Program can be configured by using the console. Also remote configuration is
possible by using TCP/IP. If you want to use GUI EZ-Setup Program to configure the video
phone from a remote location, check this service option (default: 514).
AddPac Technology Proprietary & Documentation
195