Life Span VISION Owner's Manual page 7

STEP 1:
STEP 2:
STEP 3:
VISION
1. Open the carton
2. Extract the parts listed above
3. Place the Main Frame (1) onto level
ground
1. Raise the Computer and Upright tubes in
the direction of the arrows.
Note: Whilst erecting the uprights, make sure the
upright does not press against and damage the
wires inside the upright tubes. Keep holding the
upright and computer by hand so they do not fall
down and cause injury
1. Using the Allen Key Wrench (#12),
attach the screw M8*45 (#70) and
Lock Washer (#64) to the base
frame through the base and right
upright tube
2. Repeat for the left upright tube
Note: Support the Uprights with your hands to
prevent them falling down and causing injury.
7