Life Span VISION Owner's Manual page 12

to a stop. Then it will enter standby in 5 seconds. When you hold the hand pulse sensor the window will
show your heart rate. The range is from 50-200 beats per minute (Heart rate data is for reference
ONLY.)
3. BUTTON FUNCTIONS
1. ―PROG‖: when the treadmill is in standby mode, this button cycles through: ―0:00‖, ―P1-P2-P3-P4-
P5-P6-P7-P8-P9-P10-P11-P12-P13-P14-P15-U1-U2-U3-FAT‖.
a. ―0:00‖ is the manual mode and default running mode.
b. ―P1-P99‖ are built in programs
c. ―U1-U3‖ are user defined programs
d. ―FAT‖ is body fat test mode
2. ―MODE‖: mode selection button. Press this button to cycle through ―0:00‖, ―15:00‖, ―1.0‖, ―50‖
a. (―0:00‖ = manual mode, ―15:00‖ = timer countdown mode, ―1.0‖ = distance countdown mode,
―50‖ = calorie countdown mode)
b. You can adjust the value with the Speed+ & Speed- or INCL+ & INCL- buttons. Press
―START‖ to start your exercise after finishing setting the values.
3. ―START‖: begins workout. When the power is on and safety key correctly placed on the computer,
press this button to start the treadmill.
4. ―STOP‖: press button to stop the motor running
5. SPEED+\SPEED-: Increase or decrease speed when excising. Sets parameter when stopped.
6. ―INCLINE+‖, ―INCLINE-‖: increase or decreases incline. Adjust the incline gradient during excising.
Sets parameter when stopped.
7. ―SPEED: 5, 8, 12‖ Speed adjustment shortcut key
8. ―INCL: 5, 8, 12‖ Incline adjustment shortcut key.
VISION
12