Advertisement
Configuring with MyPBX
Configuring Fanvil IP phone with MyPBX
This guide is applicable to Fanvil C62/C60/C58/C56.
Please note:
This guide has been tested for Fanvil C62 with firmware version 2.2.0.0. Be aware
that different firmware versions may have different web interface formats and
functionality.
This guide will configure the IP phone with default configuration. If you are not sure
about the configuration of your IP phone, please reset your phone.
Register with MyPBX
1.
Start up the phone and identify its IP Address by pressing Menu->Status on the
phone, and you will find IP address of the phone. In this guide we will assume
the IP Address of the phone is 192.168.5.235, and IP Address of MyPBX is
192.168.5.138
2.
Start the browser on PC. In the address bar, enter the IP address of the phone:
http://192.168.5.235
3.
Enter the phone's login username (default "admin") and password (default
"admin").
www.yeastar.com
Fanvil IP Phone Configuration Guides
Figure 1 Page after login
Page 3
Advertisement
