Advertisement
2) Server Address: enter the IP address of your MyPBX, in this guide is
192.168.5.138.
3) Server Port: Enter IAX2 port of your MyPBX, in this guide is 4569
4) Account: the extension number which you want to register, in this guide
is 106
5) Password: enter the password of the extension you want to register
6) Phone Number: enter the extension's caller ID, in this guide is 106
7) Voice Mail Number: same as the feature code of entering VM box which
is set in MyPBX. In this guide, enter *2
8) Enable Registration: check it
9) Enable G.729AB: check it or not according to your necessary.
10) Leave else as it is.
9.
Click the "Apply" button at the bottom of the page. The phone will now register
with MyPBX. This can be verified via the "Status" page of MyPBX Management
Console.
Configuring to use IAX2 on Fanvil
1.
Click on the "Function Key" tab on the left side to enter the page.
2.
You can configure a "Line Key" or "Function Key" to activate IAX2 line. The
default function of the 4 "Line key" is to activate the 4 SIP lines. Now we
configure "DSS Key4" to activate IAX2 line. Configuring it as below:
www.yeastar.com
Fanvil IP Phone Configuration Guides
Page 6
Advertisement
