Connecting The Monitor; Connecting Usb Mouse; Connecting Usb Keyboard; Connecting External Devices To The Usb Ports - Fujitsu ESPRIMO Q9000 Operating Manual

Preparation for use

Connecting the monitor

► Follow the instructions contained in the monitor manual to prepare the monitor for operation
(e.g. connecting cables).
► Plug the data cable into the monitor port of the device.

Connecting USB mouse

► Connect the USB mouse to one of the USB ports on the device.

Connecting USB keyboard

► Plug the rectangular connector of the keyboard cable into the rectangular socket on the
underside of the keyboard.
► Insert the flat rectangular USB plug of the keyboard cable into a USB port of the device.

Connecting external devices to the USB ports

You can connect a wide range of external devices to the USB ports (e.g. printer, scanner, modem or
keyboard).
USB devices are hot-pluggable. This means you can connect and disconnect devices
i
while your operating system is running.
Additional information can be found in the documentation for the USB devices.
► Connect the data cable to the external device.
► Connect the data cable to a USB port.
► Read the documentation for the USB device to obtain full information about the installation of
the device.
Device drivers
The devices you connect to the USB ports usually require no driver of their own, as the
i
required software is already included in the operating system. However, if the USB device
requires its own software, please install it from the data carrier provided with the USB
device.
To ensure USB 2.0, only a 3 m long cable may be used from the front USB port to the
USB peripheral device.
10 Fujitsu Technology Solutions