Husqvarna iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, iZ5223TVAN Operator's Manual page 62

9. Belt Adjuster, Mower Deck
Remove the foot plate (two screws) and
lubricate with a grease gun, one zerk, until
grease is forced out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
IMPORTANT INFORMATION
Use minimal lubrication and remove excess
lubricant so that it does not come into
contact with belts or belt pulley drive
surfaces.
10. Steering Control Shafts
Tip the driver's seat.
Lubricate with a grease gun, one zerk for
each steering control shaft, until the grease is
forced out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
11. Mower Deck Struts
Lubricate with a grease gun, one zerk for
each strut, until the grease is forced out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
60
English-
LUBRICATION
The belt adjuster grease zerk
Lubricating the steering control shafts
Lubricating struts
8011-576
8011-578
8011-577