Checking Tire Pressures; Checking The Parking Brake; Checking The V-Belts - Husqvarna iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, iZ5223TVAN Operator's Manual

Husqvarna mower operator's manual
Hide thumbs Also See for iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, iZ5223TVAN:
Table of Contents

Advertisement

Checking Tire Pressures

All four tires should have a pressure of 15 psi
/ 103 kPa /1 bar.

Checking the Parking Brake

Visually check that no damage is found on
the lever, links, or switch belonging to the
parking brake. Perform a test drive and check
that there is sufficent braking action.
To adjust the parking brake, contact the
Husqvarna service workshop.
WARNING!
Faulty adjustment can cause
an accident.

Checking the V-belts

Deck belt
Check every 100 hours of operation. Check
for severe cracking and large nicks.
NOTE: The belt will show some small cracks
in normal operation.
To replace belt, lower the deck to its lowest
position. Remove the foot plate and belt
shields.
Use a ratchet with a 9/16" socket on the
spring idler bolt to relieve the tension on the
belt. Slide the belt off the pulley and remove
the belt.
Reverse the proceedure for installation. See
the decal on the top of deck for belt routing
information.
After installation is complete check the belt
for twists.
46
English-
MAINTENANCE
Tire pressures
The parking brake in the disengaged position
Slackening the belt tensioner
Belt routing, deck belt
8011-564
8011-511-1
8011-622
8011-580

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents