Directory - VTech CS6114 User Manual

Redial
The telephone stores the five most recently dialed numbers. When there
are already five entries, the oldest entry is deleted to make room for the
new entry.
To review and dial a number from the redial list:
Press REDIAL/
.
CID,
2. Press
desired entry displays.
3. Press /
FLASH
To delete a redial entry:
When the desired redial entry displays, press
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, call log or redial list while you are on a call. Chain dialing can
be useful if you wish to access other numbers (such as bank account
numbers or access codes) from the directory, call log or redial list.
To access a number in the directory, call log or redial list while on
a call:
To enter the directory, press MENU/SELECT twice.
.
-OR-
To enter the call log, press MENU/
Call log.
-OR-
To enter the redial list, press REDIAL/
2. Scroll to the desired entry.
3. Press /SELECT to dial the displayed number.
MENU
Find handset
Use this feature to find all system handsets.
To start paging:
Press /FIND HANDSET on the telephone
•
base when the telephone is not in use. All
idle handsets ring and ** Paging ** flashes
on the screens.
To end paging:
Press /FIND HANDSET again on the telephone base.
•
-OR-
• Press /
FLASH
handset to stop the paging tone.

Directory

The directory can store up to 30 entries.
Each handset directory is independent (for models CS6114-2 and
CS6114-21 only). Any additions, deletions or edits made on one handset
are not reflected on the other handset.
To add a directory entry:
Press MENU/SELECT three times when the handset is not in use.
.
2. When the screen displays Enter number:
• Use the dialing keys to enter the number (up to 30 digits).
-OR-
• Copy a number from the redial list by pressing REDIAL/
then press
number. Press
3. Press
MENU
When the screen displays Enter name, u se the dialing keys to enter
4.
the name (up to 5 characters). Additional key presses show other
characters of that particular key.
/SELECT to store the entry.
5. Press
MENU
While entering names and numbers, you can:
/DELETE to backspace and erase a digit or character.
• Press
MUTE
• Press and hold
CID or
• Press
• Press and hold
Press 0 to add a space.
•
when the handset is not in use.
PAUSE
or REDIAL/
to dial.
or any of the dialing keys (0-9,
CID, or REDIAL/
/SELECT to copy the number.
MENU
/SELECT to move to the name.
/DELETE to erase the entire entry.
MUTE
to move the cursor to the left or right.
/PAUSE to insert a dialing pause.
REDIAL
repeatedly until the
PAUSE
MUTE
and then scroll to select
SELECT
PAUSE
repeatedly to select a
PAUSE
7
/DELETE.
.
#
or ) on the
TONE
PAUSE
CANCEL
and