Technical Specifications - VTech CS6114 User Manual

If this equipment is causing harm to the telephone network, the telephone service provider may
temporarily discontinue your telephone service. The telephone service provider is required to
notify you before interrupting service. If advance notice is not practical, you will be notified as
soon as possible. You will be given the opportunity to correct the problem and the telephone
service provider is required to inform you of your right to file a complaint with the FCC. Your
telephone service provider may make changes in its facilities, equipment, operation, or
procedures that could affect the proper functioning of this product. The telephone service provider
is required to notify you if such changes are planned.
If this product is equipped with a corded or cordless handset, it is hearing aid compatible.
If this product has memory dialing locations, you may choose to store emergency telephone
numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency
numbers, please:
Remain on the line and briefly explain the reason for the call before hanging up.
Perform such activities in off-peak hours, such as early morning or late evening.
Industry Canada
Operation is subject to the following two conditions: () this device may not cause harmful
interference, and (2) this device must accept any interference, including interference that may
cause undesired operation.
The term ''IC:'' before the certification/registration number only signifies that the Industry Canada
technical specifications were met.
The Ringer Equivalence Number (REN) for this terminal equipment is 0.. The REN is an
indication of the maximum number of devices allowed to be connected to a telephone interface.
The termination on an interface may consist of any combination of devices subject only to the
requirement that the sum of the RENs of all the devices does not exceed five.
This product meets the applicable Industry Canada technical specifications.

Technical specifications

Frequency control
Transmit frequency
Channels
Nominal effective
range
Size
Weight
Power requirements
Memory
VTECH TELECOMMUNICATIONS LTD.
A member of THE VTECH GROUP OF COMPANIES.
Distributed in the U.S.A. by VTech Communications, Inc.
Beaverton, Oregon 97008
Distributed in Canada by VTech Technologies Canada, Ltd.
Richmond, B.C. V6W L5
Copyright © 200 for VTECH TELECOMMUNICATIONS LTD.
Printed in China.
Crystal controlled PLL synthesizer
Handset: 92.536-928.448 MHz
Telephone base: 92.536-928.448MHz
5
Maximum power allowed by FCC and IC. Actual
operating range may vary according to environmental
conditions at the time of use.
Handset:
6.50 X 2.0 X .26 in (65.0 X 5.0 X 32.0 mm)
Telephone base:
3.55 X 3.44 X 4.67 in (90.2 X 87.5 X 8.5 mm)
Charger:
2.9 X 3.9 X .85 in (74.0 X 8.0 X 47.0 mm)
Handset: 4.59oz (30.0g) (including battery)
Telephone base: 4.32oz (22.6g)
Charger: .76oz (50.0g)
Handset: 2.4V 400mAh Ni-MH battery
Telephone base: 6V AC @ 300mA
Charger: 6V AC @ 300 mA
Handset directory:
30 memory locations; up to 30 digits and 5 characters
Handset call log:
30 memory locations; up to 24 digits and 5 characters
4
9-003743-00-00