Parts Checklist; Telephone Base And Charger Installation; Wall Mounting (Optional) - VTech CS6114 User Manual

Parts checklist

Your telephone package contains the following items. Save your sales
receipt and original packaging in the event warranty service is necessary.
Charger and
charger adapter
( for CS64-2
and CS64-2)
Telephone base
power adapter

Telephone base and charger installation

Install the telephone base and charger as shown below.
Telephone
wall jack
DSL filter (not
included) is
required if you have
DSL high-speed
Internet service
Telephone
line cord
• Use only the power adapter(s) and battery(ies) supplied with this product.
To order a replacement, visit our website at www.vtechcanada.com or
call  (800) 267-7377.
• The power adapters are intended to be correctly oriented in a vertical
or floor mount position. The prongs are not designed to hold the plug in
place if it is plugged into a ceiling, under-the-table or cabinet outlet.

Wall mounting (optional)

Your telephone comes ready for tabletop use.
To mount your telephone on the wall:
. Position the top hole at the back of the telephone base against the top
mounting stud [A].
2. Slide the telephone base down on the mounting
studs [A] and [B] until it locks into place.
Telephone
line cord
CANCEL
Handset
( for CS64 and
CS64-,
2 for CS64-2 and
CS64-2)
Mounting
studs
Battery
compartment cover
( for CS64 and
CS64-,
2 for CS64-2 and
CS64-2)
Telephone base
Electrical outlet
(not controlled
by a wall switch)
Telephone base
power adapter
Telephone base
[A]
[B]
2
Battery
( for CS64 and
CS64-,
2 for CS64-2 and
CS64-2)
User's manual
User's manual
Telephone base
Charger
adapter
Charger