Sharp FO-P610 Operation Manual page 8

UP and DOWN arrow keys
7
Enlarge/reduce setting: When making a copy of a document, press these
keys to select an enlarge/reduce setting (page 47).
Volume setting: When a document is not in the feeder, press these keys to
change the speaker volume when the SPEAKER key has been pressed, or
the ringer volume at any other time (page 23).
FUNCTION key settings: Press these keys after pressing the FUNCTION
key to scroll through the FUNCTION MODE settings.
Number keys
8
Use these keys to dial numbers, and enter numbers and letters when storing
auto-dial numbers.
Panel release
9
Press this release to open the operation panel.
STOP key
10
Press this key to cancel an operation before it is completed.
COPY key
11
When a document is in the feeder, press this key to make a copy of a
document (page 47).
START/MEMORY key
12
Press this key after dialling to begin fax transmission (page 29). Press this key
before dialling to send a fax through memory (page 36).
SPEAKER key
13
Press this key to listen to the line and fax tones through the speaker when
faxing a document.
Left and right arrow keys
14
Auto-dial numbers: When sending a fax or making a phone call, press these
keys to scroll through your auto-dial numbers (page 33), the "REVIEW
CALLS" list (only available if you have Caller ID; page 56), and the last
number dialled (redial; page 35).
FUNCTION key settings: Press the right arrow key after scrolling with the up
and down arrow keys to select a FUNCTION key setting.
FUNCTION key
15
Press this key followed by the arrow keys to select special functions and
settings.
7