Sending A Fax By Automatic Dialling - Sharp FO-P610 Operation Manual

Sending a Fax by Automatic Dialling

5
When you hear the fax tone, press
•
If the transmission is completed successfully, the fax will beep once.
•
If an error occurs, the fax will beep three times and print a Transaction
Report to inform you of the problem (see page 64).
Note:
If the transmission is unsuccessful and DOCUMENT JAMMED appears in the
display, remove the document as explained on page 77.
Sending a Fax by Automatic Dialling
You can store up to 30 fax or phone numbers in the machine for automatic
dialling.
♦
Auto-dial numbers are dialled by pressing
appears in the display, and then
Storing fax and phone numbers for automatic dialling
1
FUNCTION
Press
2
Press
3
Enter the fax or voice number by pressing the number keys. Up to 32
digits can be entered. (Note: A space cannot be entered.)
•
To clear a mistake, press
•
If a pause is required between any of the digits to access a special service
or an outside line, press
seconds per pause). Several pauses can be entered in a row.
4 START/MEMORY
Press
30
once and
once.
FUNCTION
START/MEMORY
START/MEMORY
.
once.
.
. The pause appears as a hyphen (two
. Replace the handset.
until the desired number
Display:
<NEW NUMBER>
ENTER FAX #