KETRON SD1000 Owner's Manual page 61

SYSEX F0H 26H 7BH 0FH
00H 0pH vv F7H
SYSEX F0H 41H 00H 42H
12H 40H 1pH 40H
v1 v2 ... v12 xx F7H
SYSEX F0H 41H 00H 42H
12H 40H 1pH 1FH
vv xx F7H
SYSEX F0H 41H 00H 42H
12H 40H 1pH 20H
vv xx F7H
SYSEX F0H 41H 00H 42H
12H 40H 2pH 00H
vv xx F7H
SYSEX F0H 41H 00H 42H
12H 40H 2pH 01H
vv xx F7H
SYSEX F0H 41H 00H 42H
12H 40H 2pH 02H
vv xx F7H
SYSEX F0H 41H 00H 42H
12H 40H 2pH 03H
vv xx F7H
SYSEX F0H 41H 00H 42H
12H 40H 2pH 04H
vv xx F7H
SYSEX F0H 41H 00H 42H
12H 40H 2pH 05H
vv xx F7H
SYSEX F0H 41H 00H 42H
12H 40H 2pH 06H
vv xx F7H
SYSEX F0H 41H 00H 42H
12H 40H 2pH 10H
vv xx F7H
SYSEX F0H 41H 00H 42H
12H 40H 2pH 11H
vv xx F7H
SYSEX F0H 41H 00H 42H
12H 40H 2pH 12H
vv xx F7H
SYSEX F0H 41H 00H 42H
12H 40H 2pH 14H
vv xx F7H
SYSEX F0H 41H 00H 42H
12H 40H 2pH 15H
vv xx F7H
Part to rhythm allocation, p is part (0 to 15), vv is 00 (sound part) or
01 (rhythm part).
This SYSEX allows a part to play sound or drumset. There is no
limitation of the number of parts playing drumset.
Scale tuning, p is part (0 to 15), v1 to v12 are 12 semi-tones tuning
values (C, C#, D, ... A#, B), in the range -64 (00H)
0 (40H) +63(7FH) cents.This SYSEX allows non chromatic tuning of
the musical scale on a given part.Default v1, v2, ... ,v12 = 40H,
40H,...,40H (chromatic tuning).Scale tuning has no effect if the part
is assigned to a rhythm channel or if the sound played is not of
chromatic type.
(note 3)
CC1 Controller number (00-5FH) (default = 10H) (note 3)
CC2 Controller number (00-5FH) (default = 11H) (note 3)
Mod pitch control (-24,+24 semitone) (default = 40H) (note 3)
Mod tvf cutoff control (default = 40H) (note 3)
Mod Amplitude control (-100%-+100%) (default=40H) (note 3)
Mod lfo1 rate control (default = 40H). n is don't care. Rate is
common on all channels
Mod lfo1 pitch depth (0-600 cents) (default=0AH) (note 3)
Mod lfo1 tvf depth (default = 0H) (note 3)
Mod lfo1 tva depth (0-100%) (default = 0H) (note 3)
Bend pitch control (-24,+24 semitone) (default = 42H) (note 3)
Bend tvf cutoff control (default = 40H) (note 3)
Bend Amplitude control (-100%-+100%) (default=40H) (note 3)
Bend lfo1 pitch depth (0-600 cents) (default=00H) (note 3)
Bend lfo1 tvf depth (default = 0H) (note 3)