What To Do If - Zanussi ZEE6940 User Manual

Removing the dirt:
1. Use the fine scouring powder or a scouring
pad to remove the dirt.
2. Clean the appliance with a damp cloth and
some detergent.
3. Heat the hotplate to a low temperature and
leave to dry.
4. To maintain the hotplates, rub in a little
sewing machine oil now and again and
then polish off with absorbent paper.

What to do if...

Problem
The appliance does not operate.
The cooking zone does not heat
up.
The effectiveness of the hob is not
satisfactory.
20
Important! For stainless steel edges of the
hob use cleaner for stainless steel.
thermal load.
Possible cause and remedy
• Examine the fuse in the electrical system of the house in the fuse box.
If the fuses blow time after time, speak to an authorised electrician.
• Make sure that the appliance is plugged in and the electrical supply
is switched on.
• Make sure that you turn the correct control knob.
• Examine the fuse in the electrical system of the house in the fuse box.
If the fuses blow time after time, speak to an authorised electrician.
• Make sure that the hob is clean and dry.
• Make sure that the cookware is the correct size for the cooking zone.
• Make sure that the cookware has a flat bottom.
• Make sure that the heat setting is correct for this type of cooking.
The stainless steel edge of the plate can
be slightly discoloured as a result of the
www.zanussi.com