Fitting Extending & Removing The Bumper Bar - Mamas & Papas pliko pramette Instructions For Use Manual

fitting extending & removing the bumPer bar
Push the catches on the under
side of the armrests upwards
and slide the covers out of the
armrests.
fitting the bumper bar:
Slide the ends of the bumper
bar into the holes in the ends
of the armrests.
Push the bumper bar inwards
until it clicks into place.
Push the two catches on the
underside of the armrest
inwards and slide the bumper
bar fully in.
To extend the bumper
bar: Push the catches on the
underside of the armrests
inwards and slide the bumper bar
outwards until it locks in place.
To remover the bumper
bar: Push the catches under the
armrests inwards and slide the
bumper bar out of the armrests.
When removing the bumper
bar, insert the plugs provided
to close the armrests of the
chassis.
WaRnIng: Always fit the
covers once the bumper bar is
removed.
- 8 -