Mamas & Papas pliko pramette Instructions For Use Manual page 19

Lower the backrest into the
lowest position, see page 10.
Lift the foot end of the pram
upwards from the seats
backrest.
To fit the hood:
Attach the hood to the frame
on the opposite side to the
handles by pushing the hood
brackets into the arm rest slots
until they lock in place.
Fasten the studs on the back
of the hood to the studs on
the underside of the pushchair
footrest.
attaching the apron:
Slot the apron over the
backrest of the pushchair.
Fasten the press studs on the
sides of the apron to the studs
on the sides of the pushchair.
Reverse the procedure to
convert the pram back into a
pushchair.
- 19 -