Shock Absorber Adjustment; Steering Wheel Assembly Instructions; Steering Wheel Hardware - Yerf-Dog Fun-Kart 3203A Owner's Manual

SHOCK ABSORBER ADJUSTMENT

1. Locate the
ABSORBERS (78) at the front
and rear of the FUN-KART.
2. The factory
SHOCKS for normal operating
conditions.
3. Locate the
ADJUSTMENT HOLE at the
base of the spring.
4. Place the end of a narrow
screwdriver in
ADJUSTMENT HOLE.

STEERING WHEEL ASSEMBLY INSTRUCTIONS

(90) STEERING WHEEL
(89) STEERING SHAFT
SHOCK ADJUSTMENT HOLE
SHOCK
pre-set the
SHOCK
the SHOCK
(90) STEERING
WHEEL
(55) 1/4" NYLOCKNUT

STEERING WHEEL HARDWARE

Item Descritption
9 BOLT, 1/4"-20 X 1- 3/4"
55 NUT, 1/4" - 20
113 STEERING WHEEL CAP
A SCREW
(78) SHOCK ABSORBER
5. Turn
ADJUSTMENT
counter-clockwise around
the SHOCK to decrease
shock absorption.
6. Turn
ADJUSTMENT
clockwise
SHOCK to increase shock
absorption.
Counter
Clockwise
7.
adjustment
desired effect is attained.
(9) 1/4" - 20 x 1-3/4"
HEX HEAD BOLT
(89) STEERING SHAFT
(9) 1/4" - 20 x 1-3/4"
HEX HEAD BOLT
Qty
3
3
1
1
11
the SHOCK
HOLE
the SHOCK
HOLE
around the
Experiment with the
until the
(113) STEERING WHEEL CAP
(A) PHILLIPS HEAD SCREW