Table of Contents
Advertisement
Be careful with electricity:
Power Outlet: To prevent electric shock, be sure the electrical plug used on the receiver's power cord is
compatible with the electrical outlet used to supply power to the PX-TUDI-01. Connect the power cord only
to a power source that operates at 100 ~ 240 Volts AC, 50/60 Hz.
Power Plug: A three pin power plug is provided with the receiver. Be sure it is used with a properly
grounded three-wire power socket.
Power Cord: Be sure the power cord is routed so that it will not be stepped on or pinched by heavy items.
Power Overloading: Avoid overloading electrical outlets or extension cords, which could result in an
electric shock or fire.
Natural Calamities: To protect the equipment from natural calamities when the tuner is left unused for a
long period, disconnect it from the power source.
Protect Other Equipment: Unplug the tuner before connecting any other equipment, especially the TV
antenna. Connect all equipment to the receiver before plugging any power cords to the power source.
Power Lines: Be sure your TV antenna is not located near overhead power lines, or where it might fall into
any power lines. Also be careful to avoid touching any such power lines when installing the TV antenna.
Antenna Grounding: Be sure that antenna is grounded to provide protection from lightening and build-up
of static electricity
!
Also follow these precautions:
Ventilation: Do not block the ventilation slots on the PX-TUDI-01, Blocking the airflow may damage the
PX-TUDI-01. Arrange the components so that the air can flow freely around the PX-TUDI-01. Ensure that
there is adequate ventilation if the PX-TUDI-01 is placed in a stand. Put the PX-TUDI-01 in a properly
ventilated area, away from direct sunlight or any source of heat.
Overheating: Avoid placing the PX-TUDI-01 on top of a hot component such as a power amplifier.
Risk of Fire: Do not place the PX-TUDI-01 on top of easily combustible material, such as carpet or fabric.
Proper Connections: Ensure that all cables and equipment are connected to the PX-TUDI-01 as described
in this manual.
Object Entry: To avoid electric shock, never place anything in the slots of the case and never remove the
cover.
Water Exposure: Exposure to mist, rain, etc., may lead to electric shock or fire.
Content
iii
Advertisement
Table of Contents
