Connection Panel; Rf/Video Cable Types - NEC PX-TUDI-01 Owner's Manual

Connection Panel

The connection panel is equipped with connectors for attaching antenna and NEC Plasma Display.
.
A
A. TV SCART
Connects the SCART output on PX-TUDI-01 and S-Video, Audio L/R input of your NEC Plasma Display
for both audio and video output.
B. Composite Video, Audio L/R
Can be used for e.g. recording.
C. Coaxial SPDIF Output
Digital Audio Output: Connect to your Audio amplifier's Coaxial SPDIF input
D. RS-232
A 115kbit/s RS232 serial port suitable for connection to a PC, usually for software upgrade and data
output
E. RF IN
Connects the VHF/UHF antenna. This connector accepts input signals ranging from 51 to 858 MHz
RF OUT
is looped through from RF IN and can be used to connect a second receiver.
F. LED Power Indication
Red= Stand-by. Green = On
G. Infrared Sensor Connector
Connect the IR sensor cable to PX-TUDI-01 and mount sensor on display (see quick install manual)
H. 230 V AC
Connect the attached Y- shaped Power Cable.
I. Power Switch

RF/Video Cable Types

Audio/Video (RCA) connector and cables – These cables are commonly
grouped with three connectors on both ends, and are color coded as yellow –
video signal, white – left signal, and red – right audio signal.
SCART connector and cable – delivers both video and audio signals to your
Display. It combines the same excellent picture quality as S-Video and stereo
sound, all in a single cable.
Installation
B C D E F G H I
2 - 5