Chapter 3: Initial Configuration; Introduction - NEC PX-TUDI-01 Owner's Manual

Chapter 3:

Introduction

After finishing the Hardware Installation as described in Chapter 2, switch on the receiver. The
Welcome Banner will be displayed together with an instruction to press the MENU key on the
Remote Control.
With the help of the Beeper function in the "SIGNAL QUALITY" menu, it is possible to adjust the
antenna to receive the strongest possible signal in your area (see Chapter 4). In case an active
antenna is used it can be powered by the tuner box (see "Antenna Power" in this chapter).
The following Menu will be displayed after pressing the MENU key
Menu
SORT SERVICE
PARENTAL GUIDANCE
SIGNAL QUALITY
INSTALLATION
IRD STATUS
Note: Use the MENU key on the Remote Control to open the Main Menu, and the Arrow keys to
move through the menus, the OK key to select specific items, and EXIT key to return to the
previous menu.
Initial Configuration
Initial Configuration
● Initial Screen –
key on the remote control will take you to the main
menu
(On Screen Display)
● The key functions of each item on the main
menu are shown as below,
Description
Displays all of the available TV channels in separate Main List and
selected channels in the Favorites List, similarly for Radio channels
also.
Used for locking certain channels according to the age limits.
Provides detailed information about the Selected Channel and its Signal
Strength.
Used for searching terrestrial TV signals and configuring the
transmission parameters.
Indicates the latest Version of the PX-TUDI-01's software
Pressing the TUNER key followed by the MENU
of OSD
3-1