Restore Defaults
Select the option 'Restore Defaults' to reset the IRD (Receiver) to the original factory settings.
Please take careful note:
•
On selecting this option, a warning message appears saying that all your currently
saved settings will be lost.
•
If you wish to go ahead nonetheless, press OK to get the initial settings provided by the
Manufacturer.
General Settings
During Initial Configuration you must configure the following General Settings of the receiver:
On selecting the General Setting option from the
●
Installation menu, the submenu will be displayed :
1. LANGUAGE
2. I-PLATE OPTION
3. LOCAL TIME
4. AUDIO OUTPUT
You can configure the receiver for the required
●
language, and control the display and duration of the
information banner (I-Plate). You can set the time of
the receiver according to your local time.
Menu Language
Initial Configuration
On selecting this option from the above menu, you can
●
change the menu language (OSD) of the tuner.
Use Up/Down Arrow keys to select the desired
●
language and confirm with "OK".
After selecting a language from the menu, all
Note:
the menus in the OSD will change according to the
language you selected
3-5