Table of Contents
Advertisement
IR Remote Control- Monitor Display related functions (after pressing "Display" key)
18. Mute: Audio mute.
19. Side: (will not work with all NEC monitors)
20. Single: (will not work with all NEC monitors)
21. PIP: (will not work with all NEC monitors)
22. Select: (will not work with all NEC monitors)
Installation
1.
On: Press to switch ON the display as
well as tuner box.
2.
OFF: Press to switch OFF the display as
well as tuner box
3.
Wide: Press to toggle screen size.
4.
0 ~ 9 Number Keys: Used to select
sources and picture adjustment set-ups of
your Display.
Video: Select Video input source
DVD/HD: Select HD input source
RGB/PC: Select RGB input source
Contrast +/-: Adjust contrast of picture.
Brightness +/-: Adjust brightness of
picture.
Colour +/-: Adjust the colour of picture.
Auto Adjust: Automatic adjustment of
picture quality.
5.
Tuner: Press to active Tuner mode on the
remote control
6.
Display: Press to active Display mode on
the remote control.
7.
Exit: Exit the current menu selection and
return to the previous menu. Press this
button repeatedly to close all menus.
8.
Menu: Select the main OSD (On Screen
Display) menu.
11. Cursor buttons: Use left/ right keys to
select item or adjust function; use up/
down keys to select desired item on menu.
12. OK: Confirm the highlighted item in menu.
13. Vol+ / Vol-: Adjust the volume.
14. CH+ / CH-: Select channels up or down or
earlier or next page when in TV list.
16. Radio/ TV: Switch between TV and Radio
services.
17. Information:
Displays
information bar (I-Plate) on the screen.
When pressed twice the tuner displays the
Extended Program Information.
the
program
2 - 4
Advertisement
Table of Contents
