NEC PX-TUDI-01 Owner's Manual page 29

Appendix C: Troubleshooting
Problem
(5) Does not have all the
channels available after using
"Quick Scan"
(6) Does not have all the
available channels after using
"Auto Scan"
(7) Cannot lock signal by using
"Manual Scan"
(8) Cannot receive all channels
after moving the receiver to
another city
Appendix
(a) Try "Auto Scan" to scan all the channels again.
(all previously stored channels will be deleted).
(b) If you still cannot get some channels please use "Manual Scan".
(a) Try "Manual Installation" to scan these missing channels.
(a) Check in the Manual Scan menu if the frequency of the selected
channel (displayed below the channel number) is exactly same as the
frequency used in your local area.
If not, change the frequency in this menu accordingly.
(a) In the new area different channels are used.
-you can add the new channels in the "Manual Scan" menu.
- apply a new "Auto Scan or "Quick Scan"
(all previously stored channels will be deleted)
Solution
C